Allied Telesis AT-S97 - Manual (Page 201)

AT-S85 and AT-S97 Management Software User’s Guide
201
TELNET ENABLE
Syntax
telnet enable
Parameters
None.
Privilege Levels
Administrator and read-write.
Description
This command is used to activate the Telnet server on the management
module for remote Telnet management of the chassis. The default setting
for the server is disabled.
Note
Review “Telnet Server Guidelines” on page 198 for the
preconditions for remote Telnet management. For instructions on
starting a remote session, refer to “Starting a Remote Telnet or
Secure Shell Management Session” on page 20.
Example
telnet enable