Allied Telesis AT-S97 - Manual (Page 142)

Chapter 7: Event Log and Syslog Client Commands
142
Minor Level Messages
Authentication Failure The management software denied access to an
individual who attempted to locally or remotely log on
to the management module with an invalid user
name or password. Report
Copper|Fiber Port #
Offline A port in a media converter channel lost its link to the
network device. Report
Copper|Fiber Port #
Online A port in a media converter channel established a
link to a network device. Report
Copper|Fiber Port #
RX SML A port in a media converter channel is receiving the
Smart MissingLink signal. This is an indication that
the port is connected to another media converter that
supports the Smart MissingLink mode, forming a
chain of media converters. Media converters that
support the Smart MissingLink mode pass the loss of
a link on a port to all the media converters in the
chain. Report
Copper|Fiber Port #
TX SML A port in a media converter channel is sending the
Smart MissingLink signal by pulsing its transmitter
once a second to indicate that its companion port in
the channel cannot establish a link with a network
device. Report
Module Inserted The management module detected a media
converter, power, or fan module while initializing its
management software after a power cycle or reset.
Alternatively, a module was installed in a slot in the
chassis while the chassis was powered on. Report
Module Removed The management module stopped detecting a media
converter, power, or fan module during a power
cycle or reset. Alternatively, a module was removed
from a slot in the chassis while the chassis was
powered on. Report
Port # Mode Set to
A channel’s operating mode was changed to Link
Test, Missing Link, or Smart Missing Link. “Port #”
refers to the channel number. For example, the
message “Port 1 Mode Set to Smart MissingLink”
signals that channel 1 on a media converter module
was set to the Smart MissingLink mode. Report
Table 18. Event Messages (Continued)
Message Definition Classification