Allied Telesis AT-S97 - Manual (Page 159)

AT-S85 and AT-S97 Management Software User’s Guide
159
Description
As explained in “Overview” on page 146, the configuration settings of the
media converter modules are stored in two locations. One of the locations
is the master configuration file on the AT-MCF2000M Management
Module and the other is the auxiliary configuration files on the media
converter module themselves. When a media converter module is reset or
powered on, it configures its settings from one of those sources. The
source that it goes to is based on the configuration overwrite setting on the
module, which this command controls.
When the overwrite setting is disabled, a media converter uses its own
auxiliary configuration file in flash memory for its configuration settings.
When the overwrite setting is enabled, a media converter queries the
management card and the master configuration file for its settings. This
happens to be the default setting.
Example
This command disables configuration overwrite on a media converter
module in slot 2 in a chassis with the ID 0:
config overwrite disable id=0/2
This command enables configuration overwrite on a media converter
module in slot 3 in a chassis with the ID 2:
config overwrite enable id=2/3