Allied Telesis AT-S97 - Manual (Page 73)

AT-S85 and AT-S97 Management Software User’s Guide
73
Note
The SYSTEM RESET CHASSIS, SYSTEM RESET CLUSTER and
SYSTEM RESET MODULE commands may interrupt the flow of
network traffic through the ports and channels of the media
converter modules in a chassis or stack. Review the information in
the command descriptions before performing these commands.
“SYSTEM SHOW CHASSIS”
on page 99 Displays the model names and
slot assignments of the
management and media converter
modules in a chassis, as well as
the chassis’ module name and
MAC address.
“SYSTEM SHOW CLUSTER”
on page 101 Displays the model names and
slot assignments of the
management and media converter
modules in the chassis of a stack,
as well as the chassis’ module
names and MAC addresses.
“SYSTEM SHOW
INTERFACE” on page 103 Displays the parameter settings of
the ports of the channels on a
media converter module.
“SYSTEM SHOW MODULE”
on page 111 Displays status information about
the media converter, power
supply, fan, and management
modules in the chassis.
Table 5. Port and Module Commands (Continued)
Command Description