Allied Telesis AT-S97 - Manual (Page 47)

47
Chapter 3
IP Configuration Commands
This chapter contains the following sections:
ˆ “Overview” on page 48
ˆ “IP DHCP DISABLE” on page 50
ˆ “IP DHCP ENABLE” on page 51
ˆ “IP SET” on page 52
ˆ “IP SHOW” on page 54
Note
Remember to save your parameter changes in the active master
configuration file with the CONFIG SAVE command. For information,
refer to “Saving Your Configuration Changes” on page 23 or Chapter
8, “Configuration File Commands” on page 145.