Allied Telesis AT-S97 - Manual (Page 172)

Chapter 9: File System Commands
172
server. For instructions, refer to Chapter 3, “IP Configuration
Commands” on page 47.
Command
Summary
Table 20 summarizes the file system commands.
Table 20. File System Commands
Command Description
“FILE COPY” on page 173 Creates copies of the
configuration files in the file
systems of the management and
media converter modules.
“FILE DELETE” on page 176 Deletes the configuration files from
the file systems on the modules.
“FILE DOWNLOAD” on
page 179 Downloads new versions of the
AT-S85 and AT-S97 Management
Software from a TFTP or Xmodem
server to the management and
media converter modules. You can
also download a modified master
configuration file to the
management module.
“FILE RENAME” on page 188 Renames the configuration files in
the modules’ file systems.
“FILE SHOW” on page 191 Displays the names of the files
stored in the file systems.
“FILE UPLOAD” on page 194 Primarily used to upload the
master configuration file from the
management module to a TFTP
server for editing at a
management workstation. Can
also be used to upload
configuration files between
modules.