Allied Telesis AT-S97 - Manual (Page 214)

Chapter 12: Secure Shell Server (SSH) Commands
214
SSH SHOW
Syntax
ssh show
Parameters
None.
Privilege Levels
Administrator, read-write and read-only
Description
This command is used to display the current status of the SSH server on
the management module. An example is shown in Figure 42. The status of
the server can be either Enable or Disable. If the status is Enable, the
management module can be managed remotely with an SSH client on
your network. If the status is Disable, the management module can not be
remotely managed.
Figure 42. SSH SHOW Command
Example
ssh show
SSH Status ........ Enable