Allied Telesis AT-S97 - Manual (Page 143)

AT-S85 and AT-S97 Management Software User’s Guide
143
Event Level Messages
BM update its BM.cfg
in MM The media converter module upgraded its
configuration in the management module. Report
MM overwrite BM cfg The management module configuration overwrote
the media module configuration. Report
SSH Server Disabled The SSH server, used for remote management of
the chassis or stack with an SSH client, was
disabled with the SSH DISABLE command. Report
SSH Server Enabled The SSH server was enabled with the SSH ENABLE
command. Report
SSH Session Close A remote SSH client ended a management session
with the management module. Report
SSH Session Open A remote SSH client established a management
session with the management module. Report
Telnet Server Disabled The Telnet server, used for remote management of
the chassis or stack from a Telnet client, was
disabled with the TELNET DISABLE command.
Report
Telnet Server Enabled The Telnet server was enabled with the TELNET
ENABLE command. Report
Telnet Session Open A remote Telnet client established a management
session with the management module. Report
Telnet Session Close A remote Telnet client ended a management session
with the management module. Report
TFTP Session Open The management module uploaded or downloaded
a file during a local or remote management session
using TFTP. For example, you would see this
message if you downloaded new management
software onto the modules using TFTP. Report
TFTP Session Close The management module completed uploading or
downloading a file to a TFTP server. Report
Xmodem Session
Open The management module started to download a file
using XMODEM. Report
Xmodem Session
Close The management module completed downloading a
file using XMODEM. Report
Table 18. Event Messages (Continued)
Message Definition Classification