Allied Telesis AT-S97 - Manual (Page 138)

Chapter 7: Event Log and Syslog Client Commands
138
LOGGING SHOW EVENTLOG
Syntax
logging show eventlog
Parameters
None.
Privilege Levels
Administrator, read-write, and read-only
Description
This command is used to view the event messages in the event log. An
example of the log is shown in Figure 22. The events are displayed in
reverse-chronology, with the newest entries listed first. The event log, at
its default setting, displays all of its messages. To view the event
messages to particular severity levels, refer to “LOGGING SET
EVENTLOG” on page 133.
Figure 22. LOGGING SHOW EVENT-LOG Command
The fields are defined here:
ˆ Date - The date of the event.
ˆ Time - The time of the event.
ˆ Status - The event status, consisting of the severity level and the
message’s classification. The possible severity levels are listed in
Table 16.
Date Time Status Message
----------------------------------------------------------------
04/21/2007
2:12:28::MN::RP::002/1::Port 7 Set to Missing Link
04/21/2007 2:12:26::MN::RP::001/1::Fiber Port 7 Online
04/21/2007 2:12:25::MN::RP::001/1::Copper Port 7 Online
04/21/2007 2:12:24::MN::RP::000/2::Fiber Port 5 Online
04/21/2007 2:12:24::MN::RP::000/2::Copper Port 5 Online
04/21/2007 2:12:22::EV::RP::000/M::SSH Server Enabled