Allied Telesis AT-S97 - Manual (Page 213)

AT-S85 and AT-S97 Management Software User’s Guide
213
SSH ENABLE
Syntax
ssh enable
Parameters
None.
Privilege Levels
Administrator and read-write
Description
This command is used to activate the SSH server on the management
module for remote management with the SSH application protocol. The
default setting for the SSH server is disabled.
Note
Refer to “SSH Server Guidelines” on page 210 for the requirements
of remote SSH management. For instructions on how to start a
management session, refer to “Starting a Remote Telnet or Secure
Shell Management Session” on page 20.
Example
ssh enable