Allied Telesis AT-S97 - Manual (Page 173)

AT-S85 and AT-S97 Management Software User’s Guide
173
FILE COPY
Syntax
file copy srcfile=system:// chassis / slot / filename .cfg
dstfile=system:// chassis / slot / filename .cfg
Parameter
srcfile=system
Specifies a location and name of a master configuration file
to copy. This parameter has the following parts:
chassis Specifies an ID number of a chassis. The
range is 0 to 31. For background
information, refer to “Chassis ID Numbers”
on page 25.
slot Identifies a slot with a module containing the
file. For background information, refer to
“Slot Numbers and Letters” on page 26.
Possible values are:
m Identifies the AT-MCF2000M
Management Module.
1 or 2 Specifies a slot number of a
media converter module in the
AT-MCF2000 Chassis. The left
slot is 1 and the right slot is 2.
1 to 4 Specifies a slot number of a
media converter module in the
AT-MCF2300 Chassis. The slots
are number 1 (left) and 2 (right)
in the top row, and 3 (left) and 4
(right) in the bottom row.
filename.cfg Specifies a name of a master configuration
file to be copied. Filenames with spaces
must be enclosed in double quotes.
Filenames are case sensitive and must
include the “.CFG” extension.
To view the ID number and slot numbers of a chassis, refer
to “SYSTEM SHOW CHASSIS” on page 99 or “SYSTEM
SHOW CLUSTER” on page 101. To view the filenames in a
file system on a module, refer to “FILE SHOW” on
page 191.