Allied Telesis AT-S97 - Manual (Page 187)

AT-S85 and AT-S97 Management Software User’s Guide
187
Another advantage of this command is that you can use either TFTP or
XMODEM to download the files. In contrast, the FILE DOWNLOAD
command supports just TFTP.
There are two command syntaxes for the two types of files you’re likely to
download to the media converter modules. Syntax 1 is used to download
new versions of the AT-S85 Management Software and Syntax 2 is for
new versions of the bootloader files.
Obviously, if you’re only interested in updating the files on selected media
converter modules, you should use the FILE DOWNLOAD command
instead, because it lets you specify the modules you want to update.
You cannot use this command to update the files on the management
module or to download configuration files to a module. For these functions,
use the FILE DOWNLOAD command.
Examples
This command downloads a new version of the AT-S85 Management
Software from a TFTP server with the IP address 192.100.10.1 to all of the
media converter modules. The name of the file is “ATS85_MCF2000.IMG:”
file fastdownload appblock srcfile=tftp://192.100.10.1/
ats85_mcf2000.img
This command uses XMODEM to download a new version of the AT-S85
Management Software to the media converter modules. The name of the
file is “ATS85.IMG:”
file fastdownload appblock srcfile=xmodem:ats85.img
This command downloads to all of the media converter modules the new
bootloader file “ATS85_BOOTLOADER.BIN” from a TFTP server with the
IP address 192.100.10.1:
file fastdownload bootblock srcfile=tftp://192.100.10.1/
ats85_bootloader.bin
This command downloads the new bootloader file “ATS85_BLDR.BIN”
using XMODEM:
file fastdownload bootblock srcfile=xmodem://ats85_bldr.bin