Allied Telesis AT-S97 - Manual (Page 100)

Chapter 5: Port and Module Commands
100
The fields are defined here:
Example
The following command displays information about a chassis with the ID
number 0:
system show chassis id=0
Table 6. SYSTEM SHOW CHASSIS Command
Parameter Description
Chassis ID Displays the ID number of a chassis. The range is 0 to 31. For
background information, refer to “Chassis ID Numbers” on
page 25.
Chassis Name Displays the name of a chassis. To set a chassis name, refer to
“SYSTEM SET CHASSIS” on page 59.
Chassis Type Displays the model name of a chassis.
MAC Address Displays the MAC address of a chassis. The AT-MCF2000M
Management Module uses its chassis’ MAC address as its own
address when communicating with a network.
Master Chassis Indicates whether the chassis contains the AT-MCF2000M
Management Module or the AT-MCF2000S Stacking Module.
A chassis with the management card will have a status of Yes,
and a unit with the stacking module will have a status of No.
Slot ID Lists the slots in the chassis. Slots that are empty are not
included. The slots are:
ˆ M: Indicates the management slot containing the
AT-MCF2000M Management Module.
ˆ number: Indicates a slot for a media converter module
number (for example, 1, 2, etc.). Empty slots are not
included in the tables.
This command does not display the AT-MCF2000S Stacking
Module.
Module Name Displays the names of the modules. To assign names, refer to
“SYSTEM SET MODULE” on page 89.
Module Type Displays the model names of the modules.
Software Version Displays the version numbers of the AT-S85 and AT-S97
Management Software programs on the modules.