Allied Telesis AT-S97 - Manual (Page 140)

Chapter 7: Event Log and Syslog Client Commands
140
ˆ Message - The chassis and slot numbers of the source module of the
event message.
Chassis and Slot IDs - The chassis ID and slot identifier of the source
module of the message. The first number is the chassis ID number
and the second is the slot number or letter, as shown in Figure 23.
Figure 23. Chassis and Slot IDs
For background information on chassis ID numbers, refer to “Chassis
ID Numbers” on page 25. For the slot identifiers, refer to Table 17.
The event messages are listed in Table 18.
Table 17. Slot Identifiers
Identifier Slot
1, 2, 3 or 4 Media converter slot.
A or B Power supply or fan module slot.
M Management module slot.
000/2
Chassis ID
Slot Identifier
Table 18. Event Messages
Message Definition Classification
Critical Level Messages
Battery Low The power charge in a module’s battery is low. The
battery may need replacing. Report
The charge in the module’s battery returned to
normal or the battery was replaced. Clear
Power Failure The input voltage of a power supply module dropped
below or exceeded the permitted operating range. Report
The input voltage of a power supply module returned
to the proper operating range. Clear