Allied Telesis AT-S97 - Manual (Page 152)

Chapter 8: Configuration File Commands
152
Log Configuration
This section controls the event log and the syslog client.
Figure 27. Log Configuration Section
The section accepts the following commands:
ˆ “LOGGING DISABLE EVENTLOG” on page 129
ˆ “LOGGING DISABLE SYSLOG” on page 130
ˆ “LOGGING ENABLE EVENTLOG” on page 131
ˆ “LOGGING ENABLE SYSLOG” on page 132
ˆ “LOGGING SET EVENTLOG” on page 133
ˆ “LOGGING SET SYSLOG” on page 135
NTP Configuration
This section controls the NTP client for setting the modules date and time
from an NTP server on your network or the Internet.
Figure 28. NTP Configuration Section
This section accepts the following commands:
ˆ “NTP DISABLE” on page 120
ˆ “NTP ENABLE” on page 121
ˆ “NTP SET” on page 122
### Log Configuration
logging enable eventLog
logging enable sysLog
logging set sysLog host=0.0.0.0
logging set sysLog facility-code=0
logging set eventLog severity-level=event
### Ntp Configuration
ntp set server=0.0.0.0
ntp set utcoffset=0
ntp disable