Allied Telesis AT-S97 - Manual (Page 112)

Chapter 5: Port and Module Commands
112
Description
This command is used to display status information about the media
converter, power supply, fan, and management modules in a chassis. The
information varies depending on the module. Figure 17 is an example of
the information for the AT-MCF2000AC Power Supply Module or the
AT-MCF2KFAN Fan Module.
Figure 17. SYSTEM SHOW MODULE Command for a Power Supply or
Fan Module
The acronym “RPS” for “Redundant Power Supply” in the top line should
be ignored. It is a misnomer for a fan module as well as for a power supply
module in a chassis with one power supply. The letter following “RPS” is
the chassis slot location of the power supply or fan module.
Figure 18 illustrates the information for the management module.
RPSA Information:
Module Name ................
Module Type ................ AT-MCF2000AC
Power OK ................... Yes
Module Present ............. Present
3.3V ....................... Good = 3.415V
12.0V ...................... Good = 12.125V
Temperature ................ 25.821 C
Temperature Threshold ...... 60 C
Fan A Speed ................ 7105 RPM
Fan B Speed ................ 7033 RPM