Diagnostics show bootloader command, Table 29: diagnostics show bootloader command – Allied Telesis AT-S97 User Manual
Page 236
Chapter 14: Diagnostics Commands
236
Figure 47. DIAGNOSTICS SHOW BOOTLOADER Command
The fields are defined here:
Chassis
Chassis
Chassis
MAC
Master
ID
Name
Type
Address
Chassis
=========================================================================
0
AT-MCF2000
11:22:33:44:55:55
Yes
Slot ID
Module Name
Module Type
Software Version
------------------------------------------------------------------
M
AT-MCF2000M
v3.0.0
1
Reg 1 traf
AT-MCF2012LC
v3.0.0
2
Reg 2 traf
AT-MCF2012LC/1
v3.0.0
=========================================================================
1
ACT Traffic
11:22:33:44:22:22
No
AT-MCF2300
Slot ID
Module Name
Module Type
Software Version
------------------------------------------------------------------
1
Reg 7 traf
AT-MCF2012LC
v3.0.0
2
Reg 8 traf
AT-MCF2012LC
v3.0.0
3
Reg 9 traf
AT-MCF2012LC
v3.0.0
4
Reg 10 traf
AT-MCF2012LC
v3.0.0
=========================================================================
2
UJ Traffic
11:22:33:44:66:77
No
AT-MCF2000
Slot ID
Module Name
Module Type
Software Version
------------------------------------------------------------------
1
District 1
AT-MCF2012LC
v3.0.0
2
District 2
AT-MCF2012LC
v3.0.0
Table 29. DIAGNOSTICS SHOW BOOTLOADER Command
Parameter
Description
Chassis ID
Displays the ID number of the chassis. The range is 0 to 31.
For background information, refer to “Chassis ID Numbers” on
page 25.
Chassis Name
Displays the name of the chassis. To set the chassis name,
refer to “SYSTEM SET CHASSIS” on page 59.
Chassis Type
Displays the model name of the chassis.
MAC Address
Displays the MAC address of the chassis.