Allied Telesis AT-S97 - Manual (Page 103)

AT-S85 and AT-S97 Management Software User’s Guide
103
SYSTEM SHOW INTERFACE
Syntax - Chassis Only
system show interface id= chassis
Syntax - Chassis and Slot
system show interface id= chassis / slot
Syntax - Chassis, Slot and Channel
system show interface id= chassis / slot / channel
Parameters
id Specifies a chassis, slot or channel. The command can
display only one device at a time. The ID consists of the
following parts:
chassis Identifies the ID number of the chassis. The
range is chassis ID number depends on which
module is installed in the management slot of
the chassis. When a management module is
installed in this slot, the chassis ID number is
either 0 or 31. When a stacking module is
installed in this slot, the range of the chassis ID
is from 1 to 30.
slot Specifies a slot number of a media converter
module with a port to be configured. The
possible values are:
1 or 2 Specifies a slot number of a media
converter module in the
AT-MCF2000 Chassis. The left slot is
1 and the right slot is 2.
1 to 4 Specifies a slot number of a media
converter module in the
AT-MCF2300 Chassis. The slots are
number 1 (left) and 2 (right) in the top
row, and 3 (left) and 4 (right) in the
bottom row.
channel Specifies a number of a channel on a media
converter module. You can specify only one
channel at a time. The range is 1 to 12. Channel
1 consists of twisted pair port 1 and fiber topic