Allied Telesis AT-S97 - Manual (Page 194)

Chapter 9: File System Commands
194
FILE UPLOAD
Syntax 1: Uploading a Configuration File to a TFTP Server
file upload srcfile=system:// chassis / slot / filename .cfg
dstfile=tftp:// ipaddress / filename .cfg
Syntax 2: Uploading a Configuration File from a Media Converter
Module to a Management Module
file upload srcfile=system:// chassis / slot / filename .cfg
dstfile=system:// chassis /m/ filename. cfg
Parameters
srcfile=system
Specifies the location and the name of the file to upload.
This parameter has the following parts:
chassis Specifies the ID number of the chassis with
the file. The value of the ID number is 0
or 31. For background information, refer to
“Chassis ID Numbers” on page 25.
slot Identifies a chassis slot. The possible values
are:
m Identifies the slot with the
AT-MCF2000M Management
Module.
1 or 2 Specifies a media converter slot
in the AT-MCF2000 Chassis.
The left slot is 1 and the right slot
is 2.
1 to 4 Specifies a media converter slot
in the AT-MCF2300 Chassis.
The slots are number 1 (left) and
2 (right) in the top row, and 3
(left) and 4 (right) in the bottom
row.
filename Specifies the name of the file to upload. A
filename with a space must be enclosed in
double quotes. The filename extension must
be “.CFG.” The filename is case sensitive.