Allied Telesis AT-S97 - Manual (Page 186)

Chapter 9: File System Commands
186
FILE FASTDOWNLOAD
Syntax 1 - AT-S85 Management Software
file fastdownload appblock srcfile=tftp:// ipaddress /
filename .img
file fastdownload appblock srcfile=xmodem:// filename .img
Syntax 2 - Bootloader
file fastdownload bootblock srcfile=tftp:// ipaddress /
filename .bin
file fastdownload bootblock srcfile=xmodem:// filename .bin
Parameters
bootblock Designates the area of flash memory reserved for the
AT-S85 boot loader files on the media converter modules.
appblock Designates the area of flash memory reserved for the
AT-S85 Management Software on the media converter
modules.
ipaddress Specifies an IP address of a TFTP server.
filename Specifies a name of a bootloader file or the AT-S85
Management Software to download to the media converter
modules using TFTP or XMODEM. Filenames with spaces
must be enclosed in double quotes. The filename
extensions must be “.BIN” for bootloader files and “.IMG”
for the management software.
Privilege Levels
Administrator and read-write.
General Description
If you need to update the bootloader files or the management software
image files on all of the media converter modules in a chassis or stack,
you can use this command instead of the FILE DOWNLOAD command.
One of the advantages of this command is speed, just as its name implies.
With this command, all of the media converter modules are updated
simultaneously by the management module, rather than sequentially, as
with the FILE DOWNLOAD command.