Allied Telesis AT-S97 - Manual (Page 111)

AT-S85 and AT-S97 Management Software User’s Guide
111
SYSTEM SHOW MODULE
Syntax
system show module id= chassis / slot
Parameters
id Identifies the ID number of a module. You can specify only
one module at a time. The ID number consists of the
following parts:
chassis Specifies a chassis ID number. The range is 0 to
31. For background information, refer to
“Chassis ID Numbers” on page 25.
slot Specifies a slot number or letter. The possible
values are:
m Specifies the management module
slot. This slot is used for the
management module or the stacking
module.
a or b Specifies a slot letter of a power
supply or fan module. The left slot is
A and the right slot is B.
1 or 2 Specifies a slot number of a media
converter module in the
AT-MCF2000 Chassis. The left slot is
1 and the right slot is 2.
1 to 4 Specifies a slot number of a media
converter module in the
AT-MCF2300 Chassis. The slots are
number 1 (left) and 2 (right) in the top
row, and 3 (left) and 4 (right) in the
bottom row.
To view the ID number and the slot numbers of a chassis,
refer to “SYSTEM SHOW CLUSTER” on page 101 or
“SYSTEM SHOW CHASSIS” on page 99.
Privilege Levels
Administrator, read-write, and read-only.