Configuring basic, Wlan security settings, Configuring basic wlan security settings – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 62
50
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Basic configuration
3
10. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the Brocade Mobility 7131N-FGR Access Point Quick Setup screen to the
last saved configuration.
Configuring basic WLAN security settings
To configure a basic security policy for a WLAN:
NOTE
A VPN tunnel must also be established to ensure the access point is using a secure connection to
the external server providing NTP, syslog or Radius resources. For more information, see
1. From the Quick Setup screen, click the Create button to the right of the Security Policy item.
At a minimum, a basic security scheme (in this case WPA2/CCMP) is recommended in a
network environment where sensitive data is transmitted.
NOTE
For information on configuring the other encryption and authentication options available to the
Brocade Mobility 7131N-FGR Access Point, see
“Configuring security options”
2. Ensure the Name of the security policy entered suits the intended configuration or function of
the policy.
Multiple WLANs can share the same security policy, so be careful not to name security policies
after specific WLANs or risk defining a WLAN to single policy. Brocade recommends naming the
policy after the attributes of the authentication or encryption type selected.
3. Select the WPA2/CCMP (802.11i) checkbox.