Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 132

120
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Enabling Wireless LANs (WLANs)
5
1. Select Network Configuration -> Wireless from the Brocade Mobility 7131N-FGR Access Point
menu tree.
If a WLAN is defined, that WLAN displays within the Wireless Configuration screen. When the
Brocade Mobility 7131N-FGR Access Point is first booted, WLAN1 exists as a default WLAN
available immediately for connection.
2. Refer to the information within the Wireless Configuration screen to view the name, ESSID,
Brocade Mobility 7131N-FGR Access Point radio designation, VLAN ID and security policy of
existing WLANs.
WLAN Name
The Name field displays the name of each WLAN that has been
defined. The WLAN names can be modified within individual WLAN
configuration screens. See
“Creating/editing individual WLANs”
page 121 to change the name of a WLAN.
ESSID
Displays the Extended Services Set Identification (ESSID)
associated with each WLAN. The ESSID can be modified within
individual WLAN configuration screens. See
on page 121 to change the ESSID of a specific
WLAN.
Radio
The Radio field displays the name of the Brocade Mobility
7131N-FGR Access Point radio the WLAN is mapped to (either the
802.11a/n radio or the
802.11b/g/n radio). To change the radio designation for a specific
WLAN, see
“Creating/editing individual WLANs”
VLAN
The VLAN field displays the specific VLAN the target WLAN is
mapped to. For information on VLAN configuration for the WLAN,
see