Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 269)

Brocade Mobility 7131N-FGR Product Reference Guide 257
53-1001947-01
Network commands
8
BR7131N>admin(network.lan)> show
Displays the Brocade Mobility 7131N-FGR Access Point LAN settings.
Syntax
Example
admin(network.lan)>show
Warning: This will display secure information,
Do you want to continue? (n/y?)y
LAN On Ethernet Port : LAN1
LAN Ethernet Timeout : disable
802.1x Port Authentication:
Username : admin
Password : ********
Auto-negoitation : disable
Speed : 100M
Duplex : full
** LAN1 Information **
LAN Name : LAN1
LAN Interface : enable
802.11q Trunking : disable
LAN IP mode : DHCP client
IP Address : 192.168.0.1
Network Mask : 255.255.255.255
Default Gateway : 192.168.0.1
Domain Name :
Primary DNS Server : 192.168.0.1
Secondary DNS Server : 192.168.0.2
WINS Server : 192.168.0.254
** LAN2 Information **
LAN Name : LAN2
LAN Interface : disable
802.11q Trunking : disable
LAN IP mode : DHCP server
IP Address : 192.168.1.1
Network Mask : 255.255.255.255
Default Gateway : 192.168.1.1
Domain Name :
Primary DNS Server : 192.168.0.2
Secondary DNS Server : 192.168.0.3
WINS Server : 192.168.0.255
admin(network.lan)>
For information on displaying LAN information using the applet (GUI), see “Configuring the LAN
interface” on page 99.
show Shows the settings for the Brocade Mobility 7131N-FGR Access Point LAN1 and LAN2 interfaces.