Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 274)

262 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.lan.bridge)> set
Sets the mesh configuration parameters for the Brocade Mobility 7131N-FGR Access Point’s LANs.
Syntax
Example
admin(network.lan.bridge)>set priority 2 63335
admin(network.lan.bridge)>set hello 2 2
admin(network.lan.bridge)>set msgage 2 20
admin(network.lan.bridge)>set fwddelay 2 15
admin(network.lan.bridge)>set ageout 2 300
admin(network.lan.bridge)>show
** LAN1 Mesh Configuration **
Bridge Priority :63335
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
** LAN2 Mesh Configuration **
Bridge Priority :63335
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
For an overview of the access point’s mesh networking options using the applet (GUI), see
“Configuring Mesh Networking” on page 519.
set priority Sets bridge priority time in seconds (0-65535) for specified
LAN.
hello Sets bridge hello time in seconds (0-10) for specified LAN.
msgage Sets bridge message age time in seconds (6-40) for specified
LAN.
fwddelay Sets bridge forward delay time in seconds (4-30) for specified
LAN.
ageout Sets bridge forward table entry time in seconds (4-3600) for
specified LAN.