Br7131n>admin(network.wireless.acl)> create – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 345
Brocade Mobility 7131N-FGR Product Reference Guide
333
53-1001947-01
Network commands
8
BR7131N>admin(network.wireless.acl)> create
Creates an MU ACL policy.
Syntax
Example
admin(network.wireless.acl.create)>show
Policy Name
: Front Lobby
Policy Mode
: allow
-----------------------------------------------------------------------------
index
start mac
end mac
-----------------------------------------------------------------------------
1
00A0F8334455
00A0F8334455
2
00A0F8400000
00A0F8402001
admin(network.wireless.acl.create)>set acl-name engineering
admin(network.wireless.acl.create)>set mode deny
admin(network.wireless.acl.create)>add-addr 00A0F843AABB
admin(network.wireless.acl.create)>add-policy
For information on configuring the ACL options available to the access point using the applet (GUI),
see
“Configuring a WLAN Access Control List (ACL)”
create
show
Displays the parameters of a new ACL policy.
set
acl-name
Sets the MU ACL policy name.
mode
Sets the ACL mode for the defined index
(1-16). Allowed MUs can access the Brocade
Mobility 7131N-FGR Access Point managed
LAN. Options are deny and allow.
add-addr
Adds specified MAC address to list of ACL MAC
addresses.
delete
Removes either a specified ACL index or all ACL
entries.
add-policy
Completes the policy creation and exits the CLI.
..
Cancels the creation of the ACL and exits the
CLI.