Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 326

314
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
ESS Identifier
:
WLAN Name
:
802.11n (5.0 GHz) Radio
: available
802.11n (2.4 GHz) Radio
: not available
Client Bridge Mesh Backhaul
: not available
Hotspot
: not available
Maximum MUs
: 127
MU Idle Timeout
: 30
Security Policy
: Default
MU Access Control
:
disallow MU to MU
: disable
Use Secure Beacon
: disable
answer Broadcast ESSID
: disable
QoS Policy
: Default
per-mu rate limiting
: disabled
per-mu rate limit (wired-to-wl)
: 1000 kb
per-mu rate limit (wl-to-wired)
: 1000 kb
admin(network.wireless.wlan.create)>show security
----------------------------------------------------------------------
Secu Policy Name
Authen
Encryption
Associated WLANs
----------------------------------------------------------------------
1 Default
Manual
WPA2/CCMP
Front Lobby
WPA Countermeasure
enable
admin(network.wireless.wlan.create)>show acl
----------------------------------------------------------------------
ACL Policy Name
Associated WLANs
----------------------------------------------------------------------
1 Default
Front Lobby
2 Admin
3rd Floor
3 Demo Room
5th Floor
admin(network.wireless.wlan.create)>show qos
----------------------------------------------------------------------
QOS Policy Name
Associated WLANs
----------------------------------------------------------------------
1 Default
Front Lobby
2 Voice
Audio Dept
3 Video
Video Dept
The CLI treats the following as invalid characters, thus they should not be used in the creation of an
ESSID (or other):
' " \ & $ ^ * + ? [ ( { | , < >
For information on creating a WLAN using the applet (GUI), see