beautypg.com

Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual

Page 368

background image

356

Brocade Mobility 7131N-FGR Product Reference Guide

53-1001947-01

Network commands

8

BR7131N>admin(network.wireless.radio.802-11n[5.0 GHz])> set

Defines specific 802.11n (5.0 GHz) radio parameters.

Syntax

Example

admin(network.wireless.radio.802-11n[5.0 GHz])>

admin(network.wireless.radio.802-11n[5.0 GHz])>set placement indoor

admin(network.wireless.radio.802-11n[5.0 GHz])>set ch-mode auto-40

admin(network.wireless.radio.802-11n[5.0 GHz])>set channel 11

admin(network.wireless.radio.802-11n[5.0 GHz])>set power 4

admin(network.wireless.radio.802-11n[5.0 GHz])>set rates 10

admin(network.wireless.radio.802-11n[5.0 GHz])>set beacon 100

admin(network.wireless.radio.802-11n[5.0 GHz])>set dtim 1 10

admin(network.wireless.radio.802-11n[2.4 GHz])>set aggr ampdu enable

admin(network.wireless.radio.802-11n[2.4 GHz])>set shortgi disable

admin(network.wireless.radio.802-11n[5.0 GHz])>set rts 2341

admin(network.wireless.radio.802-11n[5.0 GHz])>set range 40

admin(network.wireless.radio.802-11n[5.0 GHz])>set qbss-beacon 110

admin(network.wireless.radio.802-11n[5.0 GHz])>set qbss-mode enable

admin(network.wireless.radio.802-11n[2.4 GHz])>set single-antenna disable

For information on configuring the Radio 2 Configuration options available to the access point
using the applet (GUI), see

“Configuring the 802.11a/n or 802.11b/g/n radio”

on page 142.

set

placement

Defines the Brocade Mobility 7131N-FGR Access Point radio placement as indoors or
outdoors.

ch-mode

Determines how the radio channel is selected.

channel

Defines the actual channel used by the radio. Channel allowed depends on actual
country of operation.

power

Defines the antenna power transmit level. Depends on radio type, channel and country.

rf-mode

Sets the default rates for the 802.11 mode selected (a-only, n-only, or a-and-n).

rates

Sets the supported radio transmit rates.

beacon

Sets the beacon interval used by the radio.

dtim

Defines the DTIM interval (by index) used by the radio.

aggr

Sets the radio’s aggregation.

shortgi

Enables/disables a short guard interval of 40MHz.

rts

Defines the RTS Threshold value for the radio.

range

Sets the radio’s extended range (in miles 0-50).

qos

Defines the param-set, cwmin, cwmax, aifsn and txops levels for the QoS policy used for
the 5.0 GHz radio.

qbss-beacon

Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).

qbss-mode

Enables/disables the QBSS load element.

single-antenna

Enables/disables single antenna support. Enable (default setting) to decrease
sensitivity and device retries.