Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 308)

296 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
For information on configuring VPN using the applet (GUI), see “Configuring VPN tunnels” on
page 178.
salife Defines the name of the tunnnel the
Security Association Life Time <300-65535>
applies to in seconds.
ike opmode Sets the Operation Mode of IKE for to
Main or Aggr(essive).
myidtype Sets the Local ID type for IKE authentication
for (1 to 13 characters) to
(IP, FQDN, or UFQDN).
remidtype Sets the Remote ID type for IKE authentication
for (1 to 13 characters) to
(IP, FQDN, or UFQDN).
myiddata Sets the Local ID data for IKE authentication
for to . This value is not
required when the ID type is set to IP.
remiddata Sets the Local ID data for IKE authentication
for to . This value is not
required when the ID type is set to IP.
authtype > Sets the IKE Authentication type for to
( PSK or RSA).
authalgo > Sets the IKE Authentication Algorithm for
to MD5 or SHA1.
phrase Sets the IKE Authentication passphrase for
to .
encalgo Sets the IKE Encryption Algorithm for
to (one of DES, 3DES, AES128,
AES192, or AES256).
lifetime Sets the IKE Key life time in seconds for
to .
group Sets the IKE Diffie-Hellman Group for
to either G768 or G1024.