Br7131n>admin(system.config)> set – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 503

Brocade Mobility 7131N-FGR Product Reference Guide
491
53-1001947-01
System commands
8
BR7131N>admin(system.config)> set
Sets the import/export parameters.
Syntax
Example
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config>set passwd georges
admin(system.config)>show
Warning: This will display secure information,
Do you want to continue? (n/y?)y
cfg filename
: cfg.txt
cfg filepath
:
sftp server ip address
: 192.268.0.10
sftp user name
:
admin(system.config)>
For configuration file creation and export, only the set radio-config is supported. Therefore, when
configuration files for export are created, a line such as set rf-function X wips / wlan (where X is 1
or 2) is never be generated.
For configuration file import, the legacy command set rf-function X wips / wlan is
processed as it has historically.
There is no CLI menu allowing the user to enter set rf-function X wips/wlan (where X is
1 or 2).
Instead, the command set radio-configX (where X is 1,2,3,4,5,6,7, or 8) is created in the
configuration files for export.
For information on importing/exporting access point configurations using the applet (GUI), see
“Importing/exporting configurations”
set
file
Sets the configuration file name (1 to 39 characters in length).
path
Defines the path used for the configuration file upload.
server
Sets the SFTP server IP address.
user
Sets the SFTP user name (1 to 39 characters in length).