beautypg.com

Br7131n>admin(network.wan.vpn)> set – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual

Page 307

background image

Brocade Mobility 7131N-FGR Product Reference Guide

295

53-1001947-01

Network commands

8

BR7131N>admin(network.wan.vpn)> set

Sets VPN entry parameters.

Syntax

set

type

Sets the tunnel type to Auto or
Manual for the specified tunnel name.

authalgo

Sets the authentication algorithm for
to (None, MD5, or SHA1).

authkey


Sets the AH authentication key (if type is
Manual) for tunnel with the direction
set to IN or OUT, and the manual
authentication key set to . (The key
size is 32 hex characters for MD5, and 40 hex
characters for SHA1).

esp-type

Sets the Encapsulating Security Payload (ESP)
type. Options include None, ESP, or ESP-AUTH.

esp-encalgo

Sets the ESP encryption algorithm. Options
include DES, 3DES, AES128, AES192, or
AES256).

esp-enckey


Sets the Manual Encryption Key in ASCII for
tunnel and direction IN or OUT to the
key . The size of the key depends on
the encryption algorithm.
- 16 hex characters for DES
- 48 hex characters for 3DES
- 32 hex characters for AES128
- 48 hex characters for AES192
- 64 hex characters for AES256

esp-authalgo

Sets the ESP authentication algorithm. Options
include MD5 or SHA1.

esp-authkey


Sets ESP Authentication key either
for IN or OUT direction to , an ASCII
string of hex characters. If authalgo is set to
MD5, then provide 32 hex characters. If
authalgo is set to SHA1, provide 40 hex
characters.

spi

Sets 6 character IN(bound) or OUT(bound) for
AUTH (Manual Authentication) or ESP for
to (a hex value more than 0xFF)
.

usepfs

Enables or disables Perfect Forward Secrecy
for .