Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 355)

Brocade Mobility 7131N-FGR Product Reference Guide 343
53-1001947-01
Network commands
8
BR7131N>admin(network.wireless.radio.802-11n[2.4 GHz])> set
Defines specific 802.11n (2.4 GHz) radio parameters.
Syntax
Example
admin(network.wireless.radio.802-11n[2.4 GHz])>set placement indoor
admin(network.wireless.radio.802-11n[2.4 GHz])>set ch-mode user
admin(network.wireless.radio.802-11n[2.4 GHz])>set channel 11
admin(network.wireless.radio.802-11n[2.4 GHz])>set power 4
admin(network.wireless.radio.802-11n[2.4 GHz])>set rf-mode b-only
admin(network.wireless.radio.802-11n[2.4 GHz])>set rates
admin(network.wireless.radio.802-11n[2.4 GHz])>set beacon 100
admin(network.wireless.radio.802-11n[2.4 GHz])>set dtim 1 40
admin(network.wireless.radio.802-11n[2.4 GHz])>set aggr ampdu enable
admin(network.wireless.radio.802-11n[2.4 GHz])>set shortgi disable
admin(network.wireless.radio.802-11n[2.4 GHz])>set single-antenna disable
admin(network.wireless.radio.802-11n[2.4 GHz])>set preamble disable
admin(network.wireless.radio.802-11n[2.4 GHz])>set rts 2341
admin(network.wireless.radio.802-11n[2.4 GHz])>set qos cwmin 125
admin(network.wireless.radio.802-11n[2.4 GHz])>set qos cwmax 255
admin(network.wireless.radio.802-11n[2.4 GHz])>set qos aifsn 7
admin(network.wireless.radio.802-11n[2.4 GHz])>set qos txops 0
admin(network.wireless.radio.802-11n[2.4 GHz])>set qbss-beacon 110
admin(network.wireless.radio.802-11n[2.4 GHz])>set qbss-mode enable
set placement Defines the Brocade Mobility 7131N-FGR Access Point radio placement as indoors or
outdoors.
ch-mode Determines how the radio channel is selected (user, auto-20 or auto-40).
channel Defines the radio channel used. Channel allowed depends on actual country of
operation.
power Defines the antenna power transmit level. Depends on radio type, channel and country.
rf-mode Sets the default rates for the 802.11 mode selected (b-only, g-only, n-only, b-and-g, or
bg-and-n).
rates Sets the supported radio transmit rates.
beacon Sets the beacon interval used by the radio.
dtim Defines the DTIM interval (by index) used by the radio.
aggr Sets the radio’s aggregation.
shortgi Enables/disables a short guard interval of 40MHz.
preamble Enables/disables short preamble support for the radio (this is 2.4 GHz radio specific).
rts Defines the RTS Threshold value for the radio.
range Sets the radio’s extended range (in miles 0-50).
qos Defines the cwmin, cwmax, aifsn and txops levels for the QoS policy used for the radio.
qbss-beacon Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).
qbss-mode Enables/disables the QBSS load element.
single-antenna Enables/disables single antenna support. Enable (default setting) to decrease
sensitivity and device retries.