Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 270)

258 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.lan)> set
Sets the LAN parameters for the LAN port.
Syntax
Example
admin(network.lan)>
admin(network.lan)>set lan 1 enable
admin(network.lan)>set name 1 engineering
admin(network.lan)>set ethernet-port-lan 1
admin(network.lan)>set timeout 45
admin(network.lan)>set trunking 1 disable
set lan Enables or disables the Brocade Mobility 7131N-FGR
Access Point LAN interface.
name Defines the LAN name by index.
ethernet-port-lan Defines which LAN (LAN1 or LAN2) is active on the
Ethernet port.
timeout Sets the interval (in seconds) the Brocade Mobility
7131N-FGR Access Point uses to terminate its LAN
interface if no activity is detected for the specified
interval.
trunking Enables or disables 802.11q Trunking over the Brocade
Mobility 7131N-FGR Access Point LAN port.
auto-negotiation Enables or disables auto-negotiation for the access
point LAN port.
speed Defines the access point LAN port speed as either 10
Mbps or 100 Mbps.
duplex Defines the access port LAN port duplex as either half or
full.
username Specifies user name for 802.1x port authentication over
the LAN interface.
passwd The 0-32 character password for the username for the
802.1x port.
ip-mode Defines the Brocade Mobility 7131N-FGR Access Point
LAN port IP mode.
ipadr Sets the IP address used by the LAN port.
mask Defines the IP address used for Brocade Mobility
7131N-FGR Access Point LAN port network mask.
dgw Sets the Gateway IP address used by the LAN port.
domain Specifies the domain name used by the Brocade
Mobility 7131N-FGR Access Point LAN port.
dns Sets the IP address of the primary and secondary DNS
servers.
wins Defines the IP address of the WINS server used by the
LAN port.