Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 286)

274 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.lan.dhcp)> set
Sets DHCP parameters for the LAN port.
Syntax
Example
admin(network.lan.dhcp)>set range 1 192.168.0.100 192.168.0.254
admin(network.lan.dhcp)>set lease 1 86400
admin(network.lan.dhcp)>show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address : 192.168.0.254
Lease Time : 86400
For information on configuring DHCP using the applet (GUI), see “Configuring the LAN interface” on
page 99.
set range Sets the DHCP assignment range from IP address
to IP address for the specified LAN
(1-lan1, 2-lan2).
lease Sets the DHCP lease time in seconds
(1-999999) for the specified LAN.