Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 297)

Brocade Mobility 7131N-FGR Product Reference Guide 285
53-1001947-01
Network commands
8
BR7131N>admin(network.wan)> set
Defines the configuration of the Brocade Mobility 7131N-FGR Access Point WAN port.
Syntax
Example
admin(network.wan)>
admin(network.wan)>set dhcp disable
admin(network.wan)>set ipadr 157.169.22.5
admin(network.wan)>set dgw 157.169.22.1
admin(network.wan)>set dns 1 157.169.22.2
admin(network.wan)>set auto-negotiation disable
admin(network.wan)>set speed 10M
admin(network.wan)>set duplex half
admin(network.wan)>set mask 255.255.255.000
admin(network.wan)>set pppoe mode enable
admin(network.wan)>set pppoe type chap
admin(network.wan)>set pppoe user jk
admin(network.wan)>set pppoe passwd @#$goodpassword%$#
admin(network.wan)>set pppoe ka enable
admin(network.wan)>set pppoe idle 600
se
t wan enable/disable Enables or disables the Brocade Mobility 7131N-FGR
Access Point WAN port.
dhcp enable/disable Enables or disables WAN DHCP Client mode.
ipadr Sets up to 8 (using from 1 to 8) IP addresses
for the
Brocade Mobility 7131N-FGR Access Point WAN interface.
mask Sets the subnet mask for the Brocade Mobility
7131N-FGR Access Point WAN interface.
dgw Sets the default gateway IP address to .
dns Sets the IP address of one or two DNS servers, where
indicates either the primary (1) or secondary (2)
server, and is the IP address of the server.
auto-negotia
tion enable/disable Enables or disables auto-negotiation for the access point
WAN port.
speed Defines the access point WAN port speed as either 10
Mbps or 100 Mbps.
duplex Defines the access port WAN port duplex as either half or
full.
pppoe mode enable/disable Enables or disables PPPoE.
user Sets PPPoE user name.
passwd Defines the PPPoE password.
ka enable/disable Enables or disables PPPoE keepalive.
idle Sets PPPoE idle time.
type Sets PPPoE authentication type.