Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 302)

290 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.wan.nat)> add
Adds NAT entries.
Syntax
Example
admin(network.wan.nat)>add 1 indoors udp 20 29 10.10.2.2
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index name Transport start port end port internal ip translation
-----------------------------------------------------------------------------
1 indoor udp 20 29 10.10.2.2 0
For an overview of the NAT options available using the applet (GUI), see “Configuring Network
Address Translation (NAT) settings” on page 115.
add
Sets an inbound network address translation (NAT) for WAN address , where is the name of
the entry (1 to 7 characters), is the transport protocol (one of tcp, udp, icmp, ah, esp, gre, or all),
is the starting port number in a port range, is the ending port number in a port range,
is the internal IP address, and is the (optional) internal translation port.