Br7131n>admin(system.fw-update)>update – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual

Page 510

Text mode
Original mode

498

Brocade Mobility 7131N-FGR Product Reference Guide

53-1001947-01

System commands

BR7131N>admin(system.fw-update)>update

Executes the Brocade Mobility 7131N-FGR Access Point firmware update over the WAN or LAN port
using SFTP.

Syntax

NOTE

The access point must complete the reboot process to successfully update the device firmware,
regardless of whether the reboot is conducted uing the GUI or CLI interfaces.

admin(system.fw-update)>update sftp

For information on updating access point device firmware using the applet (GUI), see

“Updating

device firmware”

on page 94.

update

Defines the sftp mode used to conduct the firmware update. Specifies whether the
update is executed over the Brocade Mobility 7131N-FGR Access Point’s WAN, LAN1
or LAN2 interface .