Br7131n>admin(network.wireless.qos.create) – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 379
Brocade Mobility 7131N-FGR Product Reference Guide
367
53-1001947-01
Network commands
8
BR7131N>admin(network.wireless.qos.create)>
Defines an Brocade Mobility 7131N-FGR Access Point QoS policy.
Syntax
For information on configuring the WLAN QoS options available to the access point using the applet
(GUI), see
“Setting the WLAN Quality of Service (QoS) policy”
show
Displays QoS policy parameters.
set
qos-name
Sets the QoS name for the specified index entry.
vop
Enables or disables support (by index) for legacy VOIP
devices.
mcast
Defines primary and secondary Multicast MAC address.
wmm-qos
Enables or disables the QoS policy index specified.
param-set
Defines the data type used with the qos policy and
mesh network. When set to a value other then manual,
editing the access category values is not necessary.
Options include; 11g-default, 11b-default, 11g-wifi,
11b-wifi, 11g-voice, 11b-voice or manual for advanced
users).
cwmin
Defines Minimum Contention Window (CW-Min) for
specified access categoiry and index.
cwmax
Defines Maximum Contention Window (CW-Max) for
specified access categoiry and index.
aifsn
Sets Arbitrary Inter-Frame Space Number (AIFSN) for
specified access categoiry and index.
txops
Configures Opportunity to Transmit Time (TXOPs Time)
for specified access categoiry and index.
default
Defines CWMIN, CWMAX, AIFSN and TXOPs default
values.
add-policy
Completes the policy edit and exits the session.
..
Cancels the changes and exits.