Network wireless commands – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 322

310
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
Network wireless commands
BR7131N>admin(network.wireless)
Displays the Brocade Mobility 7131N-FGR Access Point wireless submenu. The items available
under this command include:
wlan
Displays the WLAN submenu used to create and configure up to 16 WLANs per Brocade
Mobility 7131N-FGR Access Point.
security
Displays the security submenu used to create encryption and authentication based security
policies for use with
Brocade Mobility 7131N-FGR Access Point WLANs.
acl
Displays to the Access Control List (ACL) submenu to restrict or allow MU access to Brocade
Mobility 7131N-FGR Access Point WLANs.
radio
Displays the radio configuration submenu used to specify how the 802.11a/n or 802.11b/g
radio is used with
specific WLANs.
qos
Displays the Quality of Service (QoS) submenu to prioritize specific kinds of data traffic within
a WLAN.
rate-limiting
Displays the Rate Limiting submenu.
rogue-ap
Displays the Rogue-AP submenu to configure devices located by the Brocade Mobility
7131N-FGR Access Point as friendly or threatening for interoperablity.
wips
Goes to the Wireless Intrusion Protection System (WIPS) submenu.
mu-locationing
Displays the MU locationing submenu.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to system flash.
quit
Quits the CLI.