Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 426)

414 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
System commands
8
BR7131N>admin(system.access)>set
Defines the permissions to access the Brocade Mobility 7131N-FGR Access Point applet, CLI,
SNMP as well as defining their timeout values.
Syntax
For information on configuring access point access settings using the applet (GUI), see
“Configuring data access” on page 65.
set applet Defines the applet HTTP/HTTPS access parameters.
app-timeout Sets the applet timeout. Default is 300 Mins.
ssh Sets the CLI SSH access parameters.
auth-timout Disables the radio interface if no data activity is detected after the
interval defined. Default is 120 seconds.
inactive-timeout Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.
snmp Sets SNMP access parameters for the AP’s LAN and WAN ports.
admin-auth Designates a Radius server is used in the authentication verification.
server Specifies the IP address the Remote Dial-In User Service (RADIUS)
server.
port Specifies the port on which the RADIUS server is listening. Default is
1812.
secret Defines the shared secret password for RADIUS server
authentication (up to 31 characters).
mode Enables/disables the access point message mode.
msg Defines the access point login message text (up to 511 characters).