Br7131n>admin(network.firewall)> advanced – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 405

Brocade Mobility 7131N-FGR Product Reference Guide
393
53-1001947-01
Network commands
8
BR7131N>admin(network.firewall)> advanced
Displays whether an Brocade Mobility 7131N-FGR Access Point firewall rule is intended for
inbound traffic to an interface or outbound traffic from that interface..
Syntax
Example
admin(network.firewall.adv-lan-access)>inbound
admin(network.firewall.adv-lan-access.inb)>list
-----------------------------------------------------------------------------
Idx
SCR IP-Netmask
Dst IP-Netmask
TP
SPorts
DPorts
Rev
NAT
Action
-----------------------------------------------------------------------------
1
1.2.3.4
2.2.2.2
all 1:
1:
0.0.0.0
deny
255.0.0.0
255.0.0.0
65535
65535
nat port 33
2
33.3.0.0
10.10.1.1
tcp 1:
1:
11.11.1.0 allow
255.255.255.0
255.255.255.0
65535
65535
nat port 0
For information on configuring the Firewall options available to the access point using the applet
(GUI), see
“Configuring firewall settings”
show
Shows advanced subnet access parameters.
set
Sets advanced subnet access parameters.
import
Imports rules from subnet access.
inbound
Goes to the Inbound Firewall Rules submenu.
outbound
Goes to the Outbound Firewall Rules submenu.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to flash memory.
quit
Quits and exits the CLI session.