beautypg.com

Br7131n>admin(system.ntp)> set – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual

Page 493

background image

Brocade Mobility 7131N-FGR Product Reference Guide

481

53-1001947-01

System commands

8

BR7131N>admin(system.ntp)> set

Sets NTP parameters for Brocade Mobility 7131N-FGR Access Point clock synchronization.

Syntax

Example

admin(system.ntp)>set mode enable

admin(system.ntp)>set server 1 203.21.37.18

admin(system.ntp)>set port 1 123

admin(system.ntp)>set intrvl 15

admin(system.ntp)>set zone 1

For information on configuring NTP using the applet (GUI), see

“Configuring Network Time Protocol

(NTP)”

on page 88.

set

mode

Enables or disables NTP.

server

Sets the NTP sever IP address.

intrvl

Defines the clock synchronization interval used between the Brocade
Mobility 7131N-FGR Access Point and the NTP server in minutes (15 -
65535).

time

Sets the current system time. [yyyy] - year, [mm] - month, [dd] - day of the
month, [hh] - hour of the day, [mm] - minute, [ss] second, [zone -idx] Index of
the zone.

zone

Defines the time zone (by index) for the target country.