IAI America XSEL-S - Manual (Page 82)

4. RC Gateway Function setting
76
(3) In case of MSCON
The setting of MSCON is to be carried out with being connected to PC with the enclosed cable, and
with using “Gateway Parameter Setting Tool”.
Set the operation mode setting switch located on the front panel on the MSCOM main machine, to
MANU side.
[Preparation] Connection to PC
[Procedure 1] Gateway Parameter Setting Tool Startup
1) Start up Gateway Parameter Setting Tool, select MSCON GW and click on OK button.
2) Now, the MSCON (Unit No.) can be selected. Select the unit No. to be connected and
click the OK button. If MSCON is connected to PC one to one, select 0.
Operation Mode
Setting Switch
TP Port
(SIO)
PC Software Accessory Cable
(RS232CœRS485 conversion unit)
or
(USBœRS485 with converter adapter)