IAI America XSEL-S - Manual (Page 23)

1. Outline of Control Method
17
1.3.2 For Fieldbus type (option)
(1) XSEL-P/Q/PX/QX
In the case of XSE-P/Q/PX/QX, the fieldbus board for the Gateway is attached to the network
dedicated slot or I/O slot (I/01) based on the ordered model. It can be used also together with the field
network such as CC-Link. In that case, the fieldbus board for Gateway is attached to I/O Slot 1. See
the separate instruction manual for the details of the field network.
(2) XSEL-R/S/RX/SX/RXD/SXD
For XSEL-R/S/RX/SX/RXD/SXD, the position to mount the fieldbus board for the gateway is fixed to
I/O Slot 1 (I/O1).
[1] Monitor LEDs
[2] DIP Switch
[3] Fieldbus Connector
[4] I/O slot 1 (I/O1)
[5] Network Dedicated Slot
[1] Monitor LEDs
[2] DIP Switch
[3] Fieldbus Connector
[4] I/O slot 1 (I/O1)
[7] Network I/F Module 2
[6] Network I/F Module 1