beautypg.com

3 point displays, 4 summary - hierarchical displays – Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide User Manual

Page 95

background image

Micro-PWC CONFIGURATION GUIDE

Hierarchical Displays 75

3.3.3 Point Displays

Point Displays are the most specialized hierarchical displays. Each Point Display provides detailed infor-
mation about a single point (module) in a controller. (An example is provided in

Figure 3-3

). Pre-configured

Point Display templates for the various controller module types are provided on the Micro-PWC. Tagnames
are assigned to controller modules using the controller Database Options, which are accessed from the
System Status Display. The type of the module automatically determines which template will be used to
display information about that point.

Point configuration can be accessed directly from the Point Display by clicking on the Configure item on
the Point Display menu bar. The controller Module Configuration window for the current point will be dis-
played.

Information on the display and function of point displays is provided in the Micro-PWC Operator’s Manual.

3.4 Summary - Hierarchical Displays

Hierarchical
Displays

Hierarchical Displays are pre-programmed displays provided by the
Micro-PWC, and organized into a hierarchy. The following displays are
considered hierarchical displays:

Summary displays

Group displays

Point displays

End
Configuration

The End Config item is available from the Configure menu, which appears on
the Operator Window menu bar when a Summary is displayed in the Operator
Window. Click this item to end group configuration.

Group Display

A Group Display provides an overview of four, six or eight points. The top line
displays a group legend of up to 48 characters. The display is divided into
four, six or eight blocks; the information within each block relates to one point.
There are 24,000 group displays available.

List Button

Two List buttons are found on the Configure Group window, one to aid in
selection of a Graphic Index number, and one to aid in selection of a Trend
Index
number. Click one of the List buttons to display a window containing a
list of all configured displays for the associated type (Trends or Graphics).
Select a display to be associated with the Group.

Entering an index number in the entry box enables the corresponding button
(Graphic or Trend) on the Group Info window to vector directly to a specific
Graphic or Trend display. (The Group Info window provides the operator with
access to Group and Point displays and can be called up by clicking the
Group pushbutton on the Summary display. This window is described in the
Micro-PWC Operator’s Manual.)