Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 68)

Micro-PWC CONFIGURATION GUIDE
48 System Configuration
2.8.5.6 Apply Changes
Once changes have been made to the items in the Operator Window Parameters window, the changes
can be saved without exiting the window by clicking Apply. This is especially useful when configuring
update rates, as the user can watch the effect that changes to this feature produce on a display, and adjust
the rates without closing and re-opening the configuration window.
2.8.6 Configuring Multiple Screens
Multi-screen orientation must be configured. If not configured, the software will assume a single screen of
the maximum size.
To configure multiple screens, select Basic > Multiscreen Setup from the Micro-PWC maintenance pro-
gram menu. Select the orientation and home screen by clicking on the appropriate check boxes. When
complete, click OK.
TC00697A
Figure 2-25. Multiscreen Setup