Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide User Manual
Page 170

Micro-PWC CONFIGURATION GUIDE
150 Grafx Editor
Variables
TagAtom
Enter the Tag.atom of the controller database point (or a constant value) that
is used to determine the length of the bar (e.g., tcPID.pv).
(User must define variable.)
edge_color
Enter the number of the desired outline color of the bar. (See any color palette
in the Settings or Properties windows for color numbers.)
Default: 7 (White)
edge_width Enter the number of the desired thickness of the outline of the bar
(Enter Range 0 - 3).
Default: 1
erase_color Enter the number of the color to be used in portions of the bar where the
fill_color is erased.
fill_color
Enter the number of the desired fill color of the bar.
Default: 0 (Black)
fill_dir
Enter the number from the table below representing the direction that the bar
fills as the value of Tag.atom increases from lower_limit to upper_limit.
DIRECTION
fill_dir
up
0
right
1
down
2
left
3
Default: 0
lower_limit
Enter the Tag.atom of the controller database point or the constant value that
represents the lower limit of the bar (e.g., tcPID.ilr).
Default: None
(User must define variable.)
upper_limit
Enter the Tag.atom of the controller database point or the constant value that
represents the upper limit of the bar (e.g., tcPID.iur).
Default: None
(User must define variable.)
✎ Note
The bargraph model is sized as a 10 x 10 unit rectangle. To change
its size, change its reference point to one of its corners using the
Change Ref pop-up menu item and then scale it to fit in the desired
area.