Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 74)

Micro-PWC CONFIGURATION GUIDE
54 System Configuration
2.10.2.5 Exiting Default Login Configuration
To exit the Default Login Configuration window and save changes, click OK. Click Cancel to exit without
making changes.
All parameter changes take effect when the user logs out of the Micro-PWC or when the Micro-PWC is
restarted.
2.10.3 Function Access
Use the Function Access window to assign Access Levels to Micro-PWC and network functions. Select
Security > Function Access to display the Function Access Configuration window (
Figure 2-30 ).
This scrollable window contains a list of all function names available via the menus on the Micro-PWC.
Each function name has an associated button which displays the Access Level (for example, Engineer
Level 3) assigned to the function. A default set of Function Access Levels is configured on the Micro-PWC.
Table 2-4 shows the default Access Level assignments.
TC00168A
Figure 2-30. Function Access Configuration Window
Table 2-4. Default Function Access Level Assignment
Function Default Access Level
Alarm Groups Utility Engineer Level 3
Alarm Vector Assignment Engineer Level 3
Archival Block DB Maintenance Engineer Level 3