Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 91)

Micro-PWC CONFIGURATION GUIDE
Hierarchical Displays 71
3.3 Hierarchical Display Configuration
Configuration of Summary and Group displays is accomplished via the Configure option on the Summary
Display menu bar. Click this option to access the Configure menu. The Configure menu provides access to
Summary and Group configuration.
3.3.1 Summary Configuration
Select Configure > Summary to display the Configure Summary window ( Figure 3-4 ).
This window contains an entry box labelled Description and a Delete button, in addition to OK and Cancel.
In the Description entry box, enter a text string of up to 48 characters. This text will be used as the legend
which appears next to the Index number of the Summary at the top of the Summary display. Click OK to
complete the operation.
To remove the current Summary and all Groups configured on it, click Delete. A confirmation box will ask:
Delete this summary and all its groups?
Click Yes to delete the Summary and associated groups, or click No to return to the Configure Summary
window.
3.3.2 Group Configuration
To configure a Group, from the Summary window menu bar select Configure > Group. A message appears
below the menu bar, prompting:
Select group to configure...
This message will remain, and the Operator Window will remain in Group Configuration mode until you
select Configure > End Configuration from the Summary display menu bar.
TC00176A
Figure 3-4. Configure Summary Window