Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 184)

Micro-PWC CONFIGURATION GUIDE
164 Grafx Editor
4.4.3.3 FP_DYentervaluepb
The submodel FP_DYentervaluepb ( Figure 4-39 ) is a pushbutton which, when pressed, displays in a pop-
up window a means of entering a floating point value into a controller tag.atom.
Position the pointer on the submodel and click the right mouse button, then click on the Configure Sub-
model item on the resulting pop-up menu. The following Submodel Configuration window will appear.
Figure 4-39. Enter Value Pushbutton (FP_DYentervaluepb) and Resulting Pop-up Window
Figure 4-40. Enter Value Pushbutton Configuration Window